Linked IFC Model is missing/improperly showing elements

Linked IFC Model is missing/improperly showing elements

Problem:

  • When an IFC model is linked in Revit, some elements are missing or improperly shown.

Solution:

  • Whilst IFC is great in principle, many of the implementations by the various authoring systems developed by Autodesk, Nemetschek and many others still don’t always work nicely together. A well thought out and consistent use of the latest export/import settings is required from all parties.

  • Also, refer to the Autodesk Revit IFC Manual for further information.

  • Linking IFC files is the preferred and most reliable method for using IFC data in Revit.

  • Below is a list of common troubleshooting steps to try for IFC problems:

1. Check the IFC model in a Viewer and in a Text Editor

IFC Model Viewers eliminate the conversion process allowing you to view the native IFC model without any processing errors. This will allow you to verify that the output IFC model doesn’t contain any errors.

Open the IFC file in any of the following:

Then verify the elements are classified correctly (assuming they are visible).

Open the IFC file in a text editor and check the header for information around the schema and MVD (model view definition).

  • IFC2x3 Coordination View 2.0 is currently recommended for best results when opened with Revit.

  • When its officially released and supported, IFC4 Design Transfer View will become the new standard.

  • IFC4 Reference View contains less information than IFC2x3 Coordination View 2.0.

2. Check the template is set appropriately for the IFC import

Go to the File menu ► Open ► IFC Options then in Default Template for IFC Files field, ensure you have specified a default template. If nothing is selected Revit will start with the same blank template it uses internally when no template is specified.

EG: C:\ProgramData\Autodesk\RVT 2023\Templates\English\Australia\Construction-DefaultAUSENU.rte
or any other template you use.

This is the file Revit will start with when creating the final converted Revit file.

Note:

It is recommended to select a minimal template for IFC Import/Link to avoid blowing up your file size with unnecessary information like views or families. A minimal template ca be created from scratch by selecting New ► Project ► Template: <None> and then saving it as a new IFC Template.

IFC Import Options

3. Ensure the IFC plugin is up to date

The IFC functionality is updated much more frequently than Revit, as such the plugin can be updated whenever you like. Latest updates can be found either on the Autodesk App Store or in GitHub.

Autodesk App Store

Github

Installers can be found at the bottom of each release under the Assets label. You just need to download and install the MSI file. Newest updates are at the top of the page.

Github: Revit IFC Releases: Assets

4. Check if the missing elements are in a different phase

A phase filter may be preventing you from seeing the elements if they have been created/demolished in a past phase, or are in a future phase. Adjust your view’s Phase and Phase Filters appropriately to display all elements.

5. Try disabling Antivirus, antimalware software temporarily during the IFC creation/reload process

When linking an IFC file Revit generates 3 new files for each IFC model. Some of these software can interrupt the correct generation of these files:

Files

Description

Files

Description

  • ifc.RVT

Used by Revit internally and must not be moved or edited in order to maintain the relationship between the Revit project and the IFC file.

  • ifc.log.html

A log file of the conversion process and contains a report about the linked elements and includes any error messages or hints as to what elements failed and why.

  • ifc.sharedparameters.txt

Contains the shared IFC parameters found in the IFC file. If you want to schedule any of these in Revit, you can load the required custom shared parameters into your Project using this shared parameters file.

6. If the issue is only on 1 computer, try creating a new Windows Profile

  • This should be deferred to your IT professional. Instructions on starting with a clean windows profile are covered here.

  1. Disable antivirus, antimalware software, etc

  2. Make a new Windows profile (Only relevant if the issue is on one computer)

  3. Purge old files. Make sure you delete previously created *.ifc.rvt files are deleted before linking new ones.


Related articles